Ground slabs are the newest product offered by Izodom 2000 Polska and can be successfully used instead of traditional continuous strip footings and foundation walls. This is a concrete slab cast on the building site and reinforced with classic steel rods or steel fibre reinforcement. Basic formwork components produced by Izodom...

For outside walls, Izodom offers a wide range of forms with the concrete core thickness of 15 or 20 cm, and the insulation thickness of 10, 15, 20 or 30 cm. The elements are used to make the structure of the building and to insulate it. Depending on the chosen Izodom elements, you can get the outside walls with excellent thermal...

For partition walls, we recommend the MC 1/15 element with thin insulation layers and 8 cm concrete core. The load-bearing inside walls have 15 cm concrete core. Depending on their function, the elements with foam or plastic ties are used - MCFU and MCF. The type of ties influences the wall fire rating. Using the system elements...

The Izodom technology allows a few methods of making formwork corners. The elements can be joined just like a course of bricks or blocks and an opening should be cut in the wall of one of the adjoining elements to allow the monolithic connection of concrete in the corner. Without the opening, the concrete in two perpendicular walls...

In the three or four storey buildings, the unreinforced concrete is sufficient to withstand all loads. The necessity to reinforce the walls appears when the building is taller than approximately 15 metres – this decision is always made by the designer who specifies the concrete grade and amount as well as the type of reinforcement...